Home
Home - News Center
« Go Back

How to use the el-50588 Gm relearn tool?

How to use the el-50588 Gm relearn tool?
 
Step 1 - Enter leaning mode 
 
Set the gearshift lever to "P" 
Put the ignition switch to “ON” 
Enter the interface of tire pressure display by DIC 
DIC shows "Press Set / Ctrl to re-learn" 
Press “Set / Ctrl” 
The turn signal is lighted for 3 seconds and the horn beep sound twice to enter the learning mode 
 
Step 2 - Read tire pressure sensor information 
 
Start from the front-left wheel, 
Diagnostic Tool EL-50588 antenna up against the valve core position & close to the rim of the tire sidewall 
El-50588 tire pressure tool starts by the start switch Successful to read the tire pressure sensor information when the horn bleeps once 
 
Step 3 - Same method to read other tire pressure information 
Follow the instuction above to read tire pussure of the front-right, rear-right, rear-left wheels. 
Turn signals is lighted for 3 seconds and the horn bleeps twice when the learning is complete.