Creader Professional 129E is an evolutionary smart solution for passenger car diagnosis. It is characterized by covering a wide range of vehicles, featuring powerful functions, and providing precise test result.
Launch X431 CRP129E OBD2 ENG ABS SRS AT Diagnostic Oil/Brake/SAS/TMPS/ETS reset Creader 129E OBDII Code Reader Scanner pk CRP129
CRP129E supports multi-protocol
tests for a complete diagnosis.CRP 129E also supports the system diagnosis of Engine , ABS Airbag, SRS and Transmission system
For Engine System:
The diagnostic tool can help detect the engine ignition, fuel injection, air and fuel ratio, and exhaust emission conditions in Engine system to enhance vehicle performance, save energy and reduce exhaust emission.
It makes great sense in the safe driving when your car is slipping or difficult to shift. This diagnostic scanner can figure the problems out via reading codes in the Transmission system, or check the health status via live data viewing.
For ABS System:
Diagnosing an ABS problem should always start with a visual inspection of all brake components, next you will need to retrieve ABS codes to tell you where the problem is, and this is what this scanner does for you.
For SRS System:
SRS, safety restraint system, is made up of impact sensors, a control module, and the airbags themselves, and this diagnostic device can detect every electronic parameter to check its health status.
All Modes of OBDII Functions for Repair Work
This scanner supports all 10 test modes for OBD-II cars which are great for daily repair work. The table below describes the purpose of each mode of operation:
$01 - Request Current Powertrain Diagnostic Data
$02 - Request Powertrain Freeze Frame Data
$03 - Request Emission-Related Diagnostic Trouble Codes
$04 - Clear/Reset Emission-Related Diagnostic Information
$05 - Request Oxygen Sensor Monitoring Test Results
$06 - Request On-Board Monitoring Test Results for Specific Monitored Systems
$07 - Request Emission-Related Diagnostic Trouble Codes Detected During Current or Last Completed Driving Cycle
$08 - Request Control of On-Board System Test or Component
$09 - Request Vehicle Information
$0A - Request Emission-Related Diagnostic Trouble Codes with Permanent Status
Launch CRP129E Processional special function:
Oil Service Light Reset
you to perform reset maintenance mileage and data intervals for a new calculation of Engine Oil Life system once changed the oil.
EPB Electronic Park Brake Reset
is important in the maintenance of electronic braking systemrsquos safety and efficiency when replace brake pad or motor
SAS Steering Angel Sensor Reset
clear the fault steering angle sensor memories and plays an important role in the steering angle sensor calibration
Electronic throttle position reset
throttle position system sensor connected to the butterfly spindle and is primarily used to monitor the throttle position within an inner combustion engine. Due to its location, the throttle position sensor is able to effectively observe where the throttle butterfly valve is positioned.
Tire pressure system reset
makes sense in displaying sensor IDs from the vehicle's ECU, inputting TPMS sensor replacement IDs and testing sensors.
Note : These special functions
NOT for all car models, if you are confused, Please send your car brand, model and release year to me, I will check for you.
Smart (Auto-Detect) Diagnosis:
Once the tool and the vehicle are properly connected, the system starts auto-detect process. Once the whole process is successfully finished, a diagnostic report will be automatically generated and sent to your email box (if bound)
Manual Diagnosis: If Auto-Detect failure occurs, manual diagnosis is also available. Diagnosis functions include: Version Information, Read DTCs, Clear DTCs and Read Data Stream (supports 3 display modes: Value, Graph and Merged).
Top 8 Reasons
To Choose CRP129E
1. CRP129E is an upgraded Version of CRP129 and Creader VIII, Supports
2. Fast VIN autodetect, CRP129E will read VIN information when you connect Car
3. Lifetime Free Update, Supports
One-Click Update Online via Wifi
4. Automatically generate and upload diagnostic reports
5.Suppoert 5 reset Functions
: EPB/Oil/SAS/ ETS/TPMS reset
6. Support Multi-Protocol
: OBDII, EOBD, JOBD, KOBD
7. Support Multi-language: English, Spanish, French, German, Italian, Russian, Japanese, Korean, Portuguese
8. 5'inch Android Touch Screen, Easy to operate
1pc x Creader Professional 129E
1pc x OBD II diagnostic cable
1pc x DC 5V charging cable
1pc x User manual
1pc x Carrying bag
Live Support: Chat with us online
If you have any problems, please do not hesitate to contact us.